Single-phase foam concrete machine under pressure DB107
The foam concrete machine is pressurized to transfer the concrete to the floors by air pressure, so the drop in concrete volume is very small, ie the volume of material in the mixer is almost equal to the volume of output in the floors.
In addition, depreciation in this type of device is minimized due to the lack of pump menu, and as a result, the side costs are much lower than other types of foam concrete devices.
Also, the consumption of foam in this model of machine due to the design and direction of the mixer (V-shaped mixer) is between 10 to 15% less than other types of foam concrete machines. In this model of the device, if necessary, you can use a variety of fine grains (silica, pneumatic sand, etc.), which is more economical for the operator and the employer.
Technical specifications of DB107 pressed foam concrete machine
mixer:
Volume 1 cubic meter
Engine 3 horses Siemens Germany or Motogen
First-class CEW gearbox
Foam injector:
Air compressor 750 liters
Pressure regulator
Engine 7.5 hp Siemens Germany
Foam transfer launcher
Jet pump (Pentax Italy)
Solenoid valve ”
Concrete pump:
Pressurized by the tank
Pumping height 25 meters
Production capacity in a work shift of 50 cubic meters
Chassis:
3 wheels, front wheels openable during towing
Arrow axis
Electrical panel :
Flat model
Hyundai or LG interior parts
10 hp inverter (Telemecanique made in France)
Side effects:
Floor pump “2 inches
High pressure spring hose 50 meters
Toolbox
First-class accessories and valves
بدون نظر