Foam liquid for concrete machine (chemical foam DT800)

DT800 chemical foam is used for construction and sloping projects in foam concrete machine.

Advantages of DT800 chemical foam:

It is resistant to physical and chemical forces caused by mixing.
This foam with special characteristics is used in concrete foam machines in construction projects.
Compatible with the injector foam structure.
Production floor bubbles are very compact, fine and uniform, and the water in the bubble is difficult to separate.
Produced concrete has a desirable level compared to other foams in construction projects.
The amount of foam consumption in proportion to the quality of the foam concrete machine is about 0.7 liters per cubic meter.
It has good compressive strength in construction projects compared to other foams.
Accelerating the drying of concrete, especially in the cold season, is one of its benefits.
Non-volume loss in the final product is one of its advantages.

After diluting with water to a certain proportion, the foaming liquid is mixed with air in the foam concrete machine.
Produces a very durable foam in the tank.

The produced floor bubbles have a suitable resistance.
It is stable against physical and chemical forces due to mixing.

Names of vegetable foam, nano foam, acid foam are the only trade names.
The above chemical foams are usually yellow or transparent.
If you rub some chemical foam on your hands, a foam like soap liquid will form.

Dosage in foam concrete machine:
In the foam concrete machine, foam DT-800 is mixed with water in a ratio of 1 to 50.
packing :

It is offered in 20, 70 and 220 liter barrels according to the buyer’s opinion.


بدون نظر

Leave a Reply

Your email address will not be published. Required fields are marked *

eleven − 2 =