Foam concrete (DT300 protein foam)

In the production of lightweight concrete and foam concrete machine, one of the most important parameters is the use of suitable foaming fluid.

After diluting with water to a certain proportion, the foaming liquid is mixed with air in the foam concrete machine.

Produces a very durable foam in the tank.

The floor bubbles produced must have the appropriate resistance.

They are stable against physical and chemical forces caused by mixing in the foam concrete device and discharge.

The important point is the compatibility of foaming fluid with cement and concrete.

Foams are divided into two general categories: protein foams and chemical foams.

Names of vegetable foam, nano foam, acid foam are the only trade names.

Chemical foams are usually colorless or transparent and are used in foam concrete machines.

If you rub some chemical foam on your hands, a foam like soap liquid will form.

Application :

DT300 liquid is used for flooring, drilling filling and lightweight concrete production.

With the foam structure of generators and injectors, it is used in the production of lightweight concrete blocks or in the foam concrete machine.

It should be noted that the production floor bubbles are very compact, small and uniform.

The quality of produced concrete has a desirable level compared to other foams.

Other Benefits of Foam Concrete Baking Machine (DT300 Protein Foam)

Ideal product for the production of lightweight concrete blocks
Ideal product for use in flooring and sloping
Consumption of foam between 0.8 to 2 liters per cubic meter
Consumption of foam is commensurate with the quality of foam and flooring machines.
Creating good compressive strength in lightweight concrete compared to other foams
Accelerate the drying of concrete, especially in the cold season
Possibility of producing lightweight concrete parts with low density

Dosage :

The DT300 foaming liquid is mixed with water in a ratio of 1 to 50.

0/5 (0 Reviews)

بدون نظر

Leave a Reply

Your email address will not be published. Required fields are marked *