Conventional electric climber DT500
General information about conventional electric climbers:
Conventional electric climber is designed with electric control system and observing all safety points.
This model of climber machine can be used for painting, painting and cleaning surfaces.
This device is installed on special places with a tow wire with a diameter of 8 mm.
Climber can be easily and quickly assembled and used at different heights.
The climber can withstand a weight of 350 kg.
Climber as the best alternative to metal scaffolding (facade scaffolding) has the following advantages:
High economic justification and reduced financial costs
High security for users
Increase user performance speed and high efficiency
Accelerate installation and assembly
Low volume and reduce the space occupied by the building
Technical Information :
The climber has a high strength and light metal is used in its construction.
Can be applied at different heights and easily portable.
There are two tow wires on the climbers, one for carrying and the other as a security wire.
With the brake pad system in the climber, it can be used at any height.
It has a V-shaped braking system that increases its reliability as the weight of the set increases.
The climber has a centrifugal braking system (parachute).
Climber gears are made of 8620 cemented steel.
| Net weight of the device | 11Kg |
| Weight bearing capacity | 350Kg |
| Cable diameter used | 8MM |
| Moving the lift rack for one turn of the handle | 5/7CM |
| Tolerable ambient temperature | 20- up to +60 degrees Celsius |
| Load test | % 25+ |
| Cable weight per unit length | 0/22Kg/M |
Climber basket:
The produced baskets are designed and made according to the type of use and equipment required.
Ordinary electric climber basket:
Designed and manufactured for use with conventional electric climbers.
Depending on the type of use, it is designed and made in different sizes.
For easy and safe use, suitable packages have been used.
In mechanical baskets, where the tow ropes are installed, it does not prevent the basket from moving.
Climber basket with single use:
For painting and exterior cleaning in places that do not have enough space.
In large buildings, it is installed in special places and rain-proof areas.
Designed for cleaning indoor areas and places where one-on-one operations are required.
How to install climbers on buildings and industrial structures:
Special structures with balance weights are used on the building.
The structures contain a basket (Counter Weight) column and balance support.
A weight of 300 kg is used to create balance on the device.
Due to the installation of special wheels on the basket, the device can be easily moved in different directions.
Use the clip on the turret:
In buildings with retreats, these clamps for basket climber are used.
Clamps on the abutment are designed and made according to the type of wall.
Climber tow wire:
Special tow ropes have been used to use electric climbers.
To maintain safety, the tip of the tow wire is pressed with lead and fixed with a special clamp.
The other side of the tow wire is pressed by heat and passes through the mechanical parts.
Security systems used in conventional electric climbers:
Centrifugal or parachute braking system:
This braking system operates during acceleration and prevents the device from falling.
This system is used in elevators under the name of parachute as a security system.
Lining brake system with lining plates:
This system acts like a car brake and prevents the device from accelerating and falling.
With it, ordinary electric climber can be kept constant at any height.
Reliability increase system with increasing load:
No matter how much load is added, this mechanism causes the device to self-brake.
This mechanism locks the climber to prevent various hazards.
Safety brake system and safety tow wire:
An independent security system called security tow wire is also located on the climber.
This tow wire in cases when none of the various security departments intervene.
The whole set is locked on this tow wire to prevent the machine from falling.
Essentials that must be observed when using the climber device
To use the device, an 8 mm diameter tow wire must be used.
Each lift has a displacement capacity of 350 kg.
Use safety equipment such as seat belts, helmets, personal safety vests, etc.
Avoid carrying cargo outside the climber.
Do not use the device as an elevator.
Repair and maintenance of equipment should be done periodically.
Do not do this without installing a 15 kg weight on the tip of the safety tow wire.
Avoid lubricating the surface of the tow ropes.
بدون نظر